Skip to main content

Creating a custom bash profile

When a bash profile is not placed in the home directory, the default profile is loaded from /etc/profile. If you would like to edit or specify certain settings for certain users, a .bashrc file can be created or reconfigured, depending on your current setup. The page below will show some basic syntax for editing the file, along with some examples. The default bash profile can be seen in the code block below.

# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).

if [ "${PS1-}" ]; then
  if [ "${BASH-}" ] && [ "$BASH" != "/bin/sh" ]; then
    # The file bash.bashrc already sets the default PS1.
    # PS1='\h:\w\$ '
    if [ -f /etc/bash.bashrc ]; then
      . /etc/bash.bashrc
    fi
  else
    if [ "`id -u`" -eq 0 ]; then
      PS1='# '
    else
      PS1='$ '
    fi
  fi
fi

if [ -d /etc/profile.d ]; then
  for i in /etc/profile.d/*.sh; do
    if [ -r $i ]; then
      . $i
    fi
  done
  unset i
fi

General Syntax

\e[ : Start color scheme.
\033: equivalent to \e as an escape code
x;y : Color pair to use (x;y)
$PS1 : Your shell prompt variable.
\e[m : Stop color scheme.
\H: Display FQDN hostname.
\@: Display current time in 12-hour am/pm format
\u: Display the current username .
\h: Display the hostname
\W: Print the base of current working directory.
\$: Display # (indicates root user) if the effective UID is 0, otherwise display a $.

 

Following the codes below and syntax above,
Toss this escape code in to colorize everything green after:
\e[\[0;32m\]

More color codes:

Black       0;30     Dark Gray  1;30
Blue        0;34     Light Blue 1;34
Green       0;32     Light Green 1;32
Cyan        0;36     Light Cyan 1;36
Red         0;31     Light Red 1;31
Purple      0;35     Light Purple 1;35
Brown       0;33     Yellow        1;33
Light Gray 0;37     White         1;37

More bash references:
\a The ASCII bell character (you can also type \007)
\d Date in “Sat Sep 04″ format
\e ASCII escape character (you can also type \033)
\h First part of hostname (such as “mybox”)
\H Full hostname (such as “mybox.mydomain.com”)
\j The number of processes you’ve suspended in this shell by hitting ^Z
\l The name of the shell’s terminal device (such as “ttyp4″)
\n Newline
\r Carriage return
\s The name of the shell executable (such as “bash”)
\t Time in 24-hour format (such as “23:59:59″)
\T Time in 12-hour format (such as “11:59:59″)
\@ Time in 12-hour format with am/pm
\u Your username
\v Version of bash (such as 2.04)
\V Bash version, including patchlevel
\w Current working directory (such as “/home/koithara”)
\W The “basename” of the current working directory (such as “koithara”)
\! Current command’s position in the history buffer
\# Command number (this will count up at each prompt, as long as you type something)
\$ If you are not root, inserts a “$”; if you are root, you get a “#”
\xxx Inserts an ASCII character based on three-digit number xxx (replace unused digits with zeros, such as “\007″)
\\ A backslash

\[ This sequence should appear before a sequence of characters that don’t move the cursor (like color escape sequences). This allows bash to calculate word wrapping correctly.
\] This sequence should appear after a sequence of non-printing characters.

 

Misuse of escape sequences \[ and \] - Cannot use symbols directly in .bashrc:
\e[\[0;31m\]\hސ\uސ[\e[\[0;32m\]\w\e[\[0;31m\]]\@:ഽ_\$?\n߆\s\e[\[0;32m\]╼$

Correct escape sequences, misuse of symbols: 
\[\033[1;31m\]\hސ\uސ f\[\033[0;32m\]\w\[\033[1;31m\]]\@:ഽ_\$?\n߆\s\[\033[0;32m\]╼$


Translating Symbols for use in .bashrc


1. Search up a symbol to get UTF8 - https://www.compart.com/en/unicode/search?q=#characters
ഽ = 0xE0 0xB4 0xBD

2. Take the UTFx8 encoding and run it through wolfram -https://www.wolframalpha.com/
(Separate by commas, clean up spacing first: 0xE0, 0xB4, 0xBD)
0xE0, 0xB4, 0xBD = \340\264\275

3. Depending on encoding of the system (LANG=US.utf8), take the base conversion into bashrc or export command:
export PS1="\340\264\275" returns ഽ

Correct escape sequences and symbols:
\[\033[1;31m\]\h\336\220\u\336\220\[\033[0;32m\]\w\[\033[1;31m\]]\@:\340\264\275_\$?\n\337\206\s\[\033[0;32m\]\342\225\274$


Environment Variables


PS1: environment variable which contains the value of the default prompt. It changes the shell command prompt appearance and environment.

PS2: environment variable which contains the value the prompt used for a command continuation interpretation. You see it when you write a long command in many lines.

PS3: environment variable which contains the value of the prompt for the select operator inside the shell script.

PS4: environment variable which contains the value of the prompt used to show script lines during the execution of a bash script in debug mode.

 

Export Examples

Any of the below exports can be pasted directly into the terminal to be tested. Once the terminal is closed, these settings will be lost, so no worries about getting back to default.

No color Parrotsec:
export PS1='┌──˨\u@\h─[\w]\n└──╼\$'

Full Parrot:

export PS1="\[\033[0;31m\]\342\224\214\342\224\200\$([[ \$? != 0 ]] && echo \"[\[\033[0;31m\]\342\234\227\[\033[0;37m\]]\342\224\200\")[$(if [[ ${EUID} == 0 ]]; then echo '\[\033[01;31m\]root\[\033[01;33m\]@\[\033[01;96m\]\h'; else echo '\[\033[0;39m\]\u\[\033[01;33m\]@\[\033[01;96m\]\h'; fi)\[\033[0;31m\]]\342\224\200[\[\033[0;32m\]\w\[\033[0;31m\]]\n\[\033[0;31m\]\342\224\224\342\224\200\342\224\200\342\225\274 \[\033[0m\]\[\e[01;33m\]\\$\[\e[0m\]"
Back to top