Configure FTP

You can use scp instead, taking advantage of the added security and already-configured users on your system. It works a lot like ssh

Copy a file from a remote host to your local host -

scp -i ~/.ssh/some_key -P 22 kapak@123.username@123.123.123.12:/home/username/test .

If you still need or want FTP, you can follow the steps below to configure the FTP server and then connect with Filezilla.

Installing Very Secure FTP Daemon

I am using an Ubuntu 19.04 server in this guide, depending on your system your steps may vary slightly.

Assuming you have nothing installed, run sudo apt-get update && sudo apt install vsftpd to install vsftpd (Very Secure FTP Daemon). Navigate to the home directory of the user you wish to enable FTP access, and run the following.

# Login as your sudo user
sudo su USER

# Create FTP Directory
mkdir /home/USER/ftp
sudo chown nobody:nogroup /home/USER/ftp
sudo chmod a-w /home/USER/ftp

Create User FTP Directories

Create a directory where files can be uploaded, you can name this directory whatever you want. Give this directory permissions so you can upload files to it via FTP clients like FileZilla.

mkdir /home/USER/ftp/files
sudo chown USER:USER /home/USER/ftp/files
sudo chmod 777 /home/USER/ftp/files

Configure vsftpd Settings

If you have a firewall enabled, be sure you open the TCP ports 20, 21, 990, and 40000-50000 before you continue.

Add the following to /etc/vsftpd.conf

# FTP Initial Configuration Options
pasv_min_port=40000
pasv_max_port=50000
user_sub_token=$USER
local_root=/home/$USER/ftp
pasv_min_port=40000
pasv_max_port=40000
userlist_enable=YES
userlist_file=/etc/vsftpd.userlist
userlist_deny=NO
pasv_promiscuous=YES
allow_anon_ssl=NO
force_local_data_ssl=YES
force_local_logins_ssl=YES
ssl_tlsv1=YES
ssl_sslv2=NO
ssl_sslv3=NO
require_ssl_reuse=NO
ssl_ciphers=HIGH

Run echo "USER" | sudo tee -a /etc/vsftpd.userlist && sudo systemctl restart vsftpd to add your user to the userlist file we configured above and restart the service

tail -f /var/log/syslog in another console to see a live feed of service logs when restarting instead of checking the status with sudo systemctl status

Change or modify the following values, when editing these files I like to comment out the default value, and create a separate value in an organized list with my custom settings. This is useful later should I want to refer back to the default value I can just search it up in my file, and keeps things organized so when I can pick things back up quickly. You can do this however you see fit. The result of my modified values within vsftpd.conf is below.

# Values Modified During FTP Setup
chroot_local_user=YES
write_enable=YES
ssl_enable=YES

Run sudo systemctl restart vsftpd to restart the service and test your connection using Filezilla.

Debugging FTP Connections

If you're having issues with your FTP connection, check on the service with the following commands
sudo systemctl -l status vsftpd sudo tail -f /var/log/vsftpd.log

To test FTP connections via commandline, run the following
ftp -p IPADDRESS

You cannot connect to FTP via commandline using this method if you have enabled SSL/TLS because your connection will not be encrypted under TLS. Use Filezilla or another encrypted connection method instead.

Notes

Here's a working config file, with some comments on some extra settings I found on the manpages for vsftpd.conf

# *Example config file /etc/vsftpd.conf.bak
# *Don't forget to backup your default /etc/vsftpd.conf.bak
#
# Custom FTP configuration for basic server configuration
#
# These settings should be refined for security
# Firewall should be used and reflect the settings in this file
# For more security, use keys and disable password authentication
# +Restrict FTP access to a list of approved IP's with distributed keys


# FTP Custom Configuration Options

# Set chroot user options
chroot_local_user=YES
user_sub_token=$USER

# Set Directory FTP Will Default Into
local_root=/home/$USER/ftp
write_enable=YES
# If you can't write with Write_enable=YES, check directory permissions
# Create .../ftp/files and chmod 777 .../ftp/files


# Passive FTP Connection Settings
pasv_promiscuous=YES
pasv_min_port=40000
pasv_max_port=50000


# userlist_enable=YES tells vsftpd to read /etc/vsftpd.userlist
# /etc/vsftpd.userlist should contain one user per line
userlist_enable=YES
userlist_file=/etc/vsftpd.userlist
# Sets the userlist to be a whitelist or a blacklist
# userlist_deny=YES will deny FTP for any user on the list
userlist_deny=NO
# Enable logs for failed FTP connections due to userlist errors
# userlist_log=YES


# Enable dual logs fot vsftpd in /var/log/
# log/xferlog - stardard parsable log
# log/vsftpd.log - vsftpd formatted logs
dual_log_enable=YES


# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
# Other Settings For SSL
ssl_enable=YES
allow_anon_ssl=NO
force_local_data_ssl=YES
force_local_logins_ssl=YES
ssl_tlsv1=YES
ssl_sslv2=NO
ssl_sslv3=NO
require_ssl_reuse=NO
ssl_ciphers=HIGH


# Default vsftpd.conf Values

# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.

# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.

secure_chroot_dir=/var/run/vsftpd/empty
pam_service_name=vsftpd
connect_from_port_20=YES
use_localtime=YES
dirmessage_enable=YES
local_enable=YES
anonymous_enable=NO
listen_ipv6=YES
listen=NO

Modifying the values below during setup of TLS encryption caused vsftpd to crash on startup..
These values were obtained following this tutorial. Just noting this in case I missed something here, so I can revisit it later.

# Working values, establishes TLS connection via Filezilla FTP
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem

# Modified values from generating ssl cert that are crashing vsftpd
# rsa_cert_file=/etc/ssl/private/vsftpd.pem
# rsa_private_key_file=/etc/ssl/private/vsftpd.pem